Injection Moulding
We produce injection-moulded plastic components for textile machinery applications at our facility in Nishatabad, Faisalabad.
BINYAMIN TRADERS
FAISALABAD, PAKISTAN
•
PLASTIC INJECTION MOULDING
Plastic Textile Machinery Components
PLASTIC COMPONENTS
FOR TEXTILE MACHINERY.
MADE IN FAISALABAD.
Binyamin Traders manufactures injection-moulded plastic components for textile machinery, including thread cones, bobbins, tubes, plates, holders and selected machine parts.
Our catalogue is organised around practical machine applications, with available dimensions and specified machine fitments shown on individual product pages.
Thread Cones
Bobbins
Machine Parts
Made to Machine Specification
Available in Multiple Colours
12 Products
IN THE CURRENT CATALOGUE
160–230 mm
RING BOBBIN RANGE
Multi-Colour
AVAILABLE ON SELECTED PRODUCTS
Faisalabad
PAKISTAN
About Binyamin Traders
COMPONENTS
BUILT FOR
YOUR MACHINES.
Binyamin Traders is a plastic injection moulding manufacturer based in Nishatabad, Faisalabad, Pakistan.
We specialise in components used across textile machinery applications, with a catalogue covering thread cones, bobbins, tubes, plates, holders and selected machine parts.
Our approach is straightforward: understand the application, identify the required component, and provide the relevant dimensions, machine fitment and product information where available.
For requirements that fall outside the standard catalogue, customers can contact us with the machine details, required size or component reference so the requirement can be reviewed.
Mirza Binyamin
Chief Executive Officer
P-11206 Main Bazaar, Nishatabad,
Faisalabad,
Punjab, Pakistan
Manufacturing
Plastic Injection
Moulding
We produce injection-moulded plastic components for textile machinery applications at our facility in Nishatabad, Faisalabad.
Made to Specification
Components are produced to the dimensions published on the relevant product pages. Ring bobbins are available in the sizes listed in the current catalogue.
Colour Options
Selected components are available in multiple colours. Available options depend on the product.
Machine Parts
Specific machine fitments are identified on individual product pages where confirmed. Additional machine-part requirements can be discussed directly.
How We Work
Requirements begin with the application: the machine, the component and the required size.
From the confirmed specification, we focus on producing the relevant moulded component and supplying the product information needed for review.
- Components are produced to the dimensions published on the relevant product pages.
- Ring bobbins are available in the sizes listed in the current catalogue.
- Selected components are available in multiple colours.
- Specific machine fitments are identified on individual product pages where confirmed.
- Additional machine-part requirements can be discussed directly.
Visit or Enquire
Our facility is located at P-11206 Main Bazaar, Nishatabad, Faisalabad, Punjab, Pakistan.
For a product requirement, send the machine make, model, component type or reference information and we will review it with you.
Product Catalogue
Textile Machinery
Components
Browse the Binyamin Traders catalogue of injection-moulded plastic components for textile machinery.
Products are grouped by application, with available dimensions and machine fitments provided on individual product pages.
Showing 12 of 12
Filters:
Brand:
Search: ""
No products match your search
Send us the machine details, component name or reference information and the requirement can be reviewed.
Request a Quote
Thread Cones
Length: 114 mm
Plastic Cone — Sewing Thread
Injection-moulded cone for sewing-thread winding. 114 mm long, available in multiple colours.
Fits
SSMHACOBATAINING
+2 more
Thread Cones
Length: 169 mm
Plastic Large Cone — Sewing Thread
Injection-moulded cone for sewing-thread winding. 169 mm long, with the same upper and lower diameters as the standard cone.
Fits
SSMHACOBATAINING
+2 more
Thread Cones
Length: 132 mm
Plastic Cone — Embroidery Thread
Injection-moulded flanged cone for embroidery-thread winding. 132 mm long with a 77 mm base.
Fits
SSMTAINING (China)KING THREAD
+2 more
Thread Cones
Length: 170 mm
Shelford Type Plastic Cone
Injection-moulded cone for Shelford-type and automatic cone winding. 170 mm long, 120–122 g.
Fits
ShelfordMurata (Muratec, Japan)Savio (Italy)
+3 more
Bobbins & Machine Parts
Plastic Simplex Bobbin — Spinning
Injection-moulded simplex bobbin for roving frames. Made to suit the machine; sizes available on request.
Fits
Lakshmi Rieter (LR)Toyoda (Japan)Zinser (Germany)
+1 more
Bobbins & Machine Parts
Length: 160 mm – 230 mm
Ring Bobbin
Injection-moulded ring spinning bobbin. Available from 160 mm to 230 mm, in blade and adapter types.
Fits
Lakshmi Rieter (LR)Zinser (Germany)Toyota (Japan)
+2 more
Bobbins & Machine Parts
Length: 170 mm
Cheese Tube Bobbin Pipe
Injection-moulded parallel tube for cheese winding. 170 mm long, 43 mm outside diameter.
Fits
SSMZinser (Germany)Toyota (Japan)
+2 more
Bobbins & Machine Parts
Length: 67 mm
Plastic Plate — Card Winder
Injection-moulded card winder plate. 67 × 63 mm, 2 mm thick, with a 40 mm hole.
Bobbins & Machine Parts
Bobbin Holder
Injection-moulded open-cage holder for creel and winding applications. Dimensions available on request.
Bobbins & Machine Parts
Bobbin Plate
Injection-moulded bobbin plate with a central boss and mounting bore. Dimensions available on request.
Bobbins & Machine Parts
Spindle Gear
Injection-moulded spindle drive gear with three fixing bores. Dimensions available on request.
Bobbins & Machine Parts
Nylon Gear
Injection-moulded fine-pitch nylon gear with three fixing bores, for textile machine drives. Dimensions available on request.
| Product | Dimensions | Fits machines | Actions |
|---|---|---|---|
|
Plastic Cone — Sewing Thread
Thread Cones
|
Length 114 mm Upper side OD 30 mm Lower side OD 38 mm Weight 13 – 14 g |
SSM, HACOBA, TAINING, High Speed, Local | Details Enquire |
|
Plastic Large Cone — Sewing Thread
Thread Cones
|
Length 169 mm Upper side OD 30 mm Lower side OD 38 mm Weight 23 g |
SSM, HACOBA, TAINING, High Speed, Local | Details Enquire |
|
Plastic Cone — Embroidery Thread
Thread Cones
|
Length 132 mm Upper side OD 28 mm Upper side ID 11 mm Lower side OD (corner) 77 mm Lower side ID 26 mm Weight 18 – 19 g |
SSM, TAINING (China), KING THREAD, HACOBA, Local | Details Enquire |
|
Shelford Type Plastic Cone
Thread Cones
|
Length 170 mm Upper side OD 54 mm Upper side ID 40 mm Lower side OD 77 mm Lower side ID 71 mm Weight 120 – 122 g |
Shelford, Murata (Muratec, Japan), Savio (Italy), Schlafhorst (Saurer Group, Germany), SSM (Switzerland), Veejay Lakshmi (India) | Details Enquire |
|
Plastic Simplex Bobbin — Spinning
Bobbins & Machine Parts
|
Available on request | Lakshmi Rieter (LR), Toyoda (Japan), Zinser (Germany), Howa / Marzoli / T.F.O. | Details Enquire |
|
Ring Bobbin
Bobbins & Machine Parts
|
Length 160 mm – 230 mm | Lakshmi Rieter (LR), Zinser (Germany), Toyota (Japan), Marzoli (Italy), Howa / TMT (Japan) | Details Enquire |
|
Cheese Tube Bobbin Pipe
Bobbins & Machine Parts
|
Length 170 mm Upper side OD 43 mm Upper side ID 37 mm Lower side OD 43 mm Lower side ID 37 mm |
SSM, Zinser (Germany), Toyota (Japan), Marzoli (Italy), Howa / TMT (Japan) | Details Enquire |
|
Plastic Plate — Card Winder
Bobbins & Machine Parts
|
Length 67 mm Width 63 mm Thickness 2 mm Hole size 40 mm Weight 5.5 g |
— | Details Enquire |
|
Bobbin Holder
Bobbins & Machine Parts
|
Available on request | — | Details Enquire |
|
Bobbin Plate
Bobbins & Machine Parts
|
Available on request | — | Details Enquire |
|
Spindle Gear
Bobbins & Machine Parts
|
Available on request | — | Details Enquire |
|
Nylon Gear
Bobbins & Machine Parts
|
Available on request | — | Details Enquire |
Where Our Parts Are Used
Industries &
Applications
Our components are made around the requirements of textile machinery applications.
The current catalogue covers components used in thread winding, spinning, embroidery and related textile machine operations.
Sewing Thread Manufacturing
Components for sewing-thread winding applications, including cones and related products specified for the machine makes and models listed in the catalogue.
Products for this application
Embroidery Thread Production
Components for embroidery-thread winding applications, including flanged cones and related products identified for the relevant machinery.
Products for this application
Bobbin & Winding Applications
Components such as bobbins, tubes, holders and plates used in winding and related textile machinery operations.
Products for this application
Textile Machine Components
Selected plastic machine parts for textile equipment, with product-specific applications and fitments shown where confirmed.
Products for this application
Manufacturing
Plastic Injection Moulding
We produce our components by plastic injection moulding at our facility in Nishatabad, Faisalabad.
How we work
- Components are moulded to the sizes published on each product page.
- Ring bobbins are produced from 160 mm to 230 mm as per your requirement size.
- Simplex bobbins are matched to your roving frame model.
- Cones, bobbins and plates are moulded in a range of colours.
- Other mechanical parts for these machines are supplied on request.
Visit or enquire
Our facility is at P-11206 Main Bazaar, Nishatabad, Faisalabad, Punjab, Pakistan. To discuss a requirement, arrange a visit or request samples, contact us directly.
Quality
Consistent Components.
Clear Specifications.
Quality starts with the requirement.
We focus on moulded components that match the dimensions and machine applications specified for each product.
Product Information
Where dimensions, colours or machine fitments are confirmed, the information is presented directly on the product page.
This keeps the catalogue practical and helps customers verify the requirement before making an enquiry.
Requirement Clarity
For non-standard requirements, customers can share the machine model, existing component, drawing or dimensional information where available.
The more detail provided at the enquiry stage, the easier it is to review the appropriate component.
Send the machine make, model, component type or reference information and we will review the requirement with you.
Request a QuoteFrequent Questions
Questions About
Our Components?
What products do you supply?
Binyamin Traders supplies injection-moulded plastic components for textile machinery, including thread cones, bobbins, tubes, plates, holders and selected machine parts.
Can you supply different sizes?
Selected components are available in the dimensions shown in the current catalogue. For a requirement outside the listed size, contact us with the machine and dimensional details for review.
Which machines do the products fit?
Machine makes and models are listed on individual product pages where confirmed. Share your machine make, model or component reference and we can review the requirement.
Are different colours available?
Selected moulded components are available in multiple colours. Available options depend on the product.
Can I request a product not shown in the catalogue?
You can send us the machine details, component name, dimensions, drawing or reference information. Additional requirements can be discussed directly.
How do I request a quote?
Use the enquiry form, email us at info@binyamintraders.com, or contact us on WhatsApp at +92 300 6629325.
Where are you located?
Binyamin Traders is based at P-11206 Main Bazaar, Nishatabad, Faisalabad, Punjab, Pakistan.
Something not answered here?
Talk to UsGet in Touch
Tell Us What
You Need.
Send us the component you are looking for, along with the machine make, model, size, drawing or reference information where available.
We will review the requirement and provide the relevant product information.
Binyamin Traders
Address
P-11206 Main Bazaar, Nishatabad,
Faisalabad,
Punjab, Pakistan
Email
Mirza Binyamin
Chief Executive Officer
Enquiry Received
Thank you. Your enquiry has been received. We will review the details and respond using the contact information provided.